The Philips Day-Brite / Philips CFI Vaporlume LED sealed industrial DW is a specialized wet location, IP rated product designed for use in both indoor and outdoor environments. It is a wet location listed, noncorrosive luminaire available in both fluorescent and LED light sources.
Day-Brite LED Fixture, Sealed Industrial Vaporlume, 120/277 VAC, LED Lamp, 46 W Lamp, 2 Lamps, 50000 hr Average Life, White Light, 4000 K Color, 80, Polycarbonate Lens, 5129 Lumens, IP65, Wall Mount, Polyester Housing, 50 in L x 7 in W x 5-3/16 in H
Average Life
|
:
|
50000 hr
|
Color Rendering Index (CRI)
|
:
|
80
|
Color Temperature
|
:
|
4000 K
|
Dimensions
|
:
|
50 in L x 7 in W x 5-3/16 in H
|
Enclosure Type
|
:
|
IP65
|
Housing Material
|
:
|
Polyester
|
Lamp Type
|
:
|
LED
|
Lamp Wattage
|
:
|
46 W
|
Lens Type
|
:
|
Polycarbonate
|
Light Color
|
:
|
White
|
Lumens
|
:
|
5129 Lumens
|
Mounting Type
|
:
|
Wall
|
Number of Lamps
|
:
|
2
|
Type
|
:
|
Sealed Industrial Vaporlume
|
Voltage Rating
|
:
|
120/277 VAC
|
- Equivalent to high ballast factor 2 lamp F32T8 at room temperature, 15% energy savings
- Non-conductive, non-corrosive housing
- Smooth exterior surface for easy cleaning
- White one piece, molded fiberglass reinforced polyester body, no rusting, no oxidation, and no corrosion
- Standard acrylic lens (A) is stippled sheet of 0.130 in THK nominal
- Continuous compressible closed cell gasket provides tight seal between plastic enclosure and luminaire body
- White ABS cam action latches standard
- Pre-painted steel lighting channel
- Two gasketed threaded (1/2 in trade size) wet location hubs installed on ends
- High efficiency LEDs provide up to 100000 hr rated life (L70, defined as 70% lumen maintenance at rated maximum ambient)
- Dimming to 5% on 0 to 10 VAC controls standard, step dim (SDIM) option available, 100/40% levels
- Driver and led boards are accessible from below, led boards are individually replaceable if required
- Combinations are available providing as much as 117 lpw delivered
- Nominal lumen packages range from 3500 to 7000 lumens, providing flexibility to optimize light levels for a specific application
- LED sources provide full illumination in low temperature applications, unlike fluorescent sources that provide reduced light levels in very cold environments
- LED sources can be frequently switched with no negative impact on life
- Minimum 80 CRI provides smooth color rendering that rivals or exceeds performance of fluorescent lamps
- Light output from the luminaire contains no infrared or ultraviolet energy, so the light won't heat or fade the objects being lit
-
Specification Sheet
https://www.revereelectric.com//ASSETS/DOCUMENTS/ITEMS/EN/Day_Brite_DWAE51L_840_4_UNV_Datasheet.pdf