Battery pack as replacement battery in the Fluke® 120 series ScopeMeters and in the Fluke® 43 and 43B power quality analyzers. The BP120MH is a nickel metal hydride battery pack, made specifically to support the ScopeMeters and power quality analyzers mentioned.

Fluke® Rechargeable Battery Pack, Replacement, NiCd Chemical System, 4.8 V DC Nominal, 1800 mAh Nominal, 4.8 V DC Charge, 5 hr Charging, Screw Terminal, Electrolyte: Ni-Mh, Plastic Case, For Use With: 120 Series ScopeMeter®, 43 and 43B Power Quality Analyzer, 3.54 x 5.31 x 2.56 in Dimensions

• The battery capacity is 3000 mAh, this is 50% more than that of the original BP120, as a results, the instrument, user will benefit from a much longer uptime than with the original NiCad battery, at the same volume and weight
• The BP120MH is more environmental friendly than the NiCad battery used before, as it contains no heavy metals
• Just as before, the battery pack can be charged while installed in the instrument, using the PM8907 power adapter/charger
• 0 to 50 deg C operating, 10 to 40 deg C quick charging, 10 to 45 deg C trickle charging, -40 to 60 deg C storage temperature
• Performing a refresh cycle every 3 months, will contribute to the lifetime of the battery pack, to prevent damage to equipment or battery
• Fully charge before use
• Keep the battery cool do not dispose in open fire
• Observe polarity
• Do not solder directly to the cells
• Do not short circuit
• Store batteries outside the instrument

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fluke_BP120MH_Specification_Sheet.pdf