The ProSoft technology fast industrial hotspot (RLX2-IHNF) provides secure wireless solutions for plant-floor, SCADA automation, process control systems and mobile worker Wi-Fi infrastructure. It operates in the 2.4 or 5 GHz bands, including DFS channels, and is good for applications up to 3.2 km. The radio features Ultra-Fast access point switchover times of less than 10 ms, which is ideal for applications such as automated storage-retrieval systems, automotive skillet lines and bottle filling machines. The radio will be appreciated by both sides - OT/IT. Your OT personnel will like the radio's EtherNet/IP embedded object and Modbus agent support, which allows them to get diagnostic data into their PLC immediately, where they can analyze and act upon data, optimizing your resources. IT departments will appreciate the radio's SNMP support.

ProSoft Technology Fast Industrial Hotspot, 10/100/1000 Base-T/Shielded RJ45/RP-SMA Connector, 6.5 to 130 Mbps 1-Channel/13.5 to 300 Mbps 2-Channel Data Transfer Rate, 10/24 V DC, <8 W, DIN Rail Mount, 5.82 in H x 4.64 in W x 1.48 in D

• EtherNet/IP™- or Modbus®-based PLCs/PACs can use message instructions to read diagnostic information from the radios, helping to reduce downtime when troubleshooting wireless network problems
• 802.11i, WPA-2 personal/enterprise using 128-bit AES encryption ensures secure networking
• Radius security ensures secure networking with advanced authentication and encryption
• Virtual local area networks (VLAN) allow for secure network segmentation
• Quality of service (QoS) provides data prioritization for I/O control devices, video data, etc
• Ultra-fast roaming (under 10 ms) maintains seamless, high-speed connections to one or more devices on moving equipment and machines (such as cranes, AGVs and carriers) as they travel between access points
• IGMP snooping and packet filtering optimizes UDP multicast traffic for superior EtherNet/IP I/O communications
• Supports the ability to communicate with multiple ethernet devices when used with existing third-party wireless infrastructures
• Supports power over ethernet (PoE) to reduce cabling costs
• Disaster recovery feature allows the radio configuration to be stored on a microSD card for quick field replacement
• Connect serial networks (Modbus, DNP 3, etc.) over 802.11 wireless networks
• 100% RH, with no condensation
• 10/100/1000 Base-T connector, shielded RJ45 IEEE 802.3, 802.3u, 802.3x ethernet port
• RS232 DB9 female serial port
• (3) RP-SMA connectors antenna port
• Industrial microSD memory module
• 802.11abgn
• -40 to 158 deg F operating temperature

• Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/ProSoft_RLX2_IHNF_A_Datasheet.pdf