The Wash-down Series unit heaters are electric unit heaters constructed for use in areas that require washing or hosing of equipment due to dirty or dusty industrial environments in non-hazardous locations. The totally enclosed water-tight construction made with corrosion-resistant material make this series ideal for industrial heating applications. The Wash-down Series is constructed with all built-in controls and safety temperature controls wired in a non-metallic NEMA 4X control panel with single-point power connections.

TPI Washdown Fan Forced Unit Heater, 3-Phase Standard, Series: 5500, 17100 Btu/hr Capacity, 240 VAC, 12.1 A, 60 Hz, 5 kW, 400 cfm Flow Rate, 12 in Width, 18 in Depth, 19-3/4 in Height, Panel Mounting, 304 Stainless Steel, Epoxy Powder Coated, Domestic

• Stainless steel finned tubular element, constructed of 304 or 316 stainless rod and fins
• Control panel on bottom of unit for ease of installation and service
• Disconnect switch with enclosure door interlock
• Front grill rotates to direct airflow
• Single-point power connection
• Fan blade epoxy coated aluminum
• Corrosion resistant in high humidity and water-saturated areas
• 40 to 110 deg F thermostat temperature rating
• Heavy duty 16 ga 304-stainless steel shroud
• NEMA 4X non-metallic control panel
• 24 V transformer and control panel
• 3-Position off-heat-fan switch
• Capillary thermostat with stainless steel sensor
• Automatic reset thermal cutout
• Totally enclosed UL listed motor
• Pilot light, power on indicator
• 24 V control voltage
• 40 deg F temperature rise
• 20 ft air throw
• Water-tight and dust-tight

• Catalog https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_1518582672247.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_86c743945dfb809daddfda0e60586c0dcba01b9297a85a48de676e60a74e642f.pdf
• Warranty Information https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_75aa7e3e26eb6be97ab42033a0b390f6acfb7e2ac6cf25de412372f5893b3d33.pdf